Declaration Of Incorporation - Schartec Easy 800 N Installation And Operating Instructions Manual

Declaration of Incorporation

in accordance with the Machinery Guidelines 2006/42/EG,
were developed, constructed, and produced in agreement with
− Machinery Guidelines 2006/42/EG
− Low-Voltage Directive 2014/35/EU
− Directive for Electromagnetic Compliance 2014/30/EU
− RoHS Guideline 2011/65/EU
The following standards were used:
− EN 60335-1, where applicable
− EN 61000-6-3
− EN 61000-6-2
− EN 12453:2000 Paragraph 5.2
− EN 60335-1:2012
− EN 60335-2-95:2015
− EN ISO 13849-1:2008
The following requirements of the Machniery Guideline 2006/42/EG were adhered to:
1.1.2, 1.1.3, 1.1.5, 1.2.1, 1.2.2, 1.2.3, 1.2.4, 1.2.6, 1.3.2, 1.3.4, 1.3.7, 1.5.1, 1.5.4, 1.5.6, 1.5.14,
1.6.1, 1.6.2, 1.6.3, 1.7.1, 1.7.3, 1.7.4
The corresponding technical documents will be transmitted electronically at the request of the
agencies.
The incomplete machine is only specified for installation in a garage door system, in order thereby
to create a complete machine according to the Machinery Guideline 2006/42/EG. The garage
door system may first be in operation when it corresponds to the above-mentioned guidelines.
Esslingen, 29.02.2020
for the assembly of an incomplete machine
Attachment II Part B
Schartec
a trademark from bau-shop-24 GmbH
Fritz-Müller-Strasse 119
73730 Esslingen, Germany
hereby declares that the door operator
Easy
(Safety of elec. devices/openers for
doors)(Electromagnetic compatability)
(Electromagnetic compatability)
(Usage safety of power-operated doors)
(Safety of electronic devices)
(Safety of electronic devices)
(Safety of machine controls)
42
bau-shop-24 GmbH
Thomas Scharpf (CEO)