Fitting And Removal Of Base - Iiyama ProLite T2236MSC User Manual

FITTING AND REMOVAL OF BASE

CAUTION
 Put the monitor on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.
 Do not give a strong impact to the monitor. It may cause damage.
 Unplug the monitor before removal or installation to avoid an electric shock or a
damage.
<Installation>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor flat on a table with front face down.
Install the stand-base to the stand.
Use 'thumb screw' provided to secure base to monitor column.
<Remove>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor flat on a table with front face down.
Remove 'thumb screw' to remove base from monitor column.
6 BEFORE YOU OPERATE THE MONITOR
Stand-Base
Stand-Base
Thumb screw
for Stand-Base fixing