Removing the speakers
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1. Remove the
base
cover.
2. Remove the
wireless
card.
3. Remove the
solid-state
4. Remove the
rear-I/O
5. Remove the
computer
Procedure
1. Disconnect the speaker cable from the system board.
2. Remove the speaker cable from the routing guides on the palm-rest assembly.
3. Lift the speakers along with its cable off the palm-rest assembly.
computer. After working inside your computer, follow the instructions in
drive.
cover.
base.
After working
www.dell.com/
31