Replacing The Coin-Cell Battery; Procedure; Post-Requisites - Dell Alienware 17 R4 Service Manual

Replacing the coin-cell battery

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1. Adhere the coin-cell battery to the palm-rest assembly.
2. Adhere the tape that secures the coin-cell battery to the palm-rest assembly.
3. Connect the coin-cell battery cable to the system board.
4. Route the coin-cell battery cable through the routing guide and adhere the tape that secures the coin-cell battery cable to the
system board.

Post-requisites

1. Replace the computer
2. Replace the rear-I/O
3. Replace the solid-state
4. Replace the wireless card.
5. Replace the base cover.
30
computer. After working inside your computer, follow the instructions in
base.
cover.
drive.
After working
www.dell.com/