Replacing The Rear-I/O Cover; Procedure; Post-Requisites - Dell Alienware 17 R4 Service Manual

Replacing the rear-I/O cover

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1. Align the tabs on the rear-I/O cover with the slots on the computer base and snap the rear-I/O cover into place.
2. Replace the two screws (M2.5x7) that secure the rear-I/O cover to the palm-rest assembly.

Post-requisites

Replace the base cover.
computer. After working inside your computer, follow the instructions in After working
www.dell.com/
25