Replacing the rear cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Slide the tabs on the rear cover into the slots on the computer base and
snap the rear cover into place.
2
Align the screw holes on the rear cover with the screw holes on the
computer base.
3
Replace the four screws (M2x3 Big head) that secure the rear cover to the
computer base.
Post-requisites
Replace the
42
base
cover.
computer. After working inside your
After working inside your