Pairing And Connecting; Playback - Teufel Holist M Technical Description And User Manual

Pairing and connecting

To play the audio of your external
player on your Holist M via Blue-
®
tooth , connect the devices with each
other. This is called "Pairing".
1. Turn on the Bluetooth
your external player (e. g. smart-
phone).
2. Push the button
"Bluetooth" input on the Holist M.
3. Push the button
hold it down for approx. 3 seconds
to start the pairing process. The
LED ring (13) shows three blue
corners.
4. Let your external player/smart-
phone scan for Bluetooth
You will find more information
about this in the user manual of
your external player.
After the search run, the
"Teufel Holist" should also be
present in the list of detected
devices.
5. Select "Teufel Holist" from the list
of detected devices.
6. If your external player asks for a
code, enter "0000" (four zeros).
(13)
(11)
18 • Holist M
®
function on
(5) to select the
(5) again and
®
devices.
Pairing is now complete. You hear a
beep tone and the LED (13) ring will
illuminate full white for 1 sec. Your
Holist M will now act as a Bluetooth
playback device and will play back
all sounds that would otherwise be
played by your external player/smart-
phone.

Playback

The volume setting of the
external player affects the
volume of the Holist M.
1. Push the button (5) to select
®
Bluetooth as the source.
2. Turn on the Bluetooth
your source device.
3. Start playback on your source
device.
You can control playback on your
source device. You can also control
some functions with the Holist M:
– Pause playback:
Push the button (10).
– Continue playback:
Push the button (10) again.
– Play next track:
Tap the button (9).
(5)
(9)
(10)
®
®
function on