Installation Of The Rear Speakers - Yamaha NX-SW10 Owner's Manual

INSTALLATION OF THE REAR SPEAKERS

Use the supplied type A wall brackets when hanging the rear speakers on a wall.
1
Attach two commercially available wood
screws (diameter about 4 mm) in the location
on the wall where the rear speaker is to be
hung, and then mount the type A bracket on
the wood screws.
Check that the wood screws are secure inside the
narrow portion of the holes in the bracket.
20 mm or more
Type A bracket
2
Attach the speaker to the bracket using the
supplied wing nut.
3
Adjust the angle of the speaker and then
tighten the wing nut.
65 mm
Wing nut (supplied)
Mounting speakers directly on the
wall
It is possible to hang the speakers directly on the wall
without using the type A brackets by attaching two wood
screws on the wall and then using the holes on the rear
panel of the speakers for direct attachment.
Wood screws having a diameter of about 4
to 5 mm (commercially available)
70 mm
7 mm
20 mm or more
Note
• After mounting, check that the speakers are attached securely.
70 mm
7