Brother PT-530 Service Manual page 34

n n Disassembling the Chassis ASSY
Removing the cutter unit and its related parts
1) Remove the cutter sensor actuator and spring from the chassis.
2) Remove two screws from the cutter unit and take it off.
3) Remove the cutter rocking gear and cutter double gears.
Figure 2.2-10 Removing the Cutter Unit and its Related Parts
Removing the cutter motor
1) Remove two screws from the cutter motor and take it off.
Figure 2.2-11 Removing the Cutter Motor
II - 18