5 ] Installing The Chassis Assy - Brother PT-530 Service Manual

[ 5 ] Installing the Chassis ASSY

(1) If the chassis ASSY has been disassembled, assemble the components, referring to the
following pages.
(2) Put the chassis ASSY on the body cover, taking care not to sandwich the harnesses between
the body cover and the chassis ASSY. Then secure the chassis ASSY with three screws.
Tightening torque: 39.2 N•cm (4 kgf•cm)
(3) Connect the thermal head cable to the main PCB and lock the connector.
(4) Connect the cutter motor harness and main motor harness.
Figure 2.2-22 Installing the Chassis ASSY
II - 28