Absolute Color Temperature And Flesh Tone Adjustment; Rgb Adjustment - Yamaha LPX-510 Owner's Manual

Absolute Color Temperature and Flesh Tone Adjustment

The absolute color temperature adjusts the tint of the whole image.
Flesh tone adjustment adjusts the color of flesh tones to the desired color.
Use the "Image" - "Color Adjustment" - "Abs. Color Temp." and "Flesh Tone" menu items to change the
settings. (p.31)
Change in color
temperature + flesh tone correction
- flesh tone correction
Dark object locus

RGB adjustment

The image brightness can be adjusted by adjusting the individual R (red), G (green) and B (blue) components
of the dark areas (offset), bright areas (gain) and intermediate areas (gamma) respectively. Because such
detailed adjustments are possible, images with greater depth can be obtained. (p.31)
Offset adjustment
Brightness
When adjusted to
the + side
When adjusted
to the - side
Input signal
To make dark areas appear more
clearly, adjust to the + side. If
adjusted to the – side, the whole
image will become sharper, but the
contrast for dark areas will become
poorer.
Functions for Enhancing Projection
• • • • Abs. Color Temp.
If you select a higher value, images appear bluish, and if
you select a lower value, images appear reddish. The
absolute color temperature can be set to one of 12
settings within the range of 5000K to 10000K.
• • • • Adjusting flesh tones
The CB (color balance) Filter will be applied
automatically so that flesh tones will appear in natural
tints in accordance with the "Picture Mode" setting. If
you would like to adjust the flesh tones to your own
preference, use the "Flesh Tone" setting to adjust. If a
large value is set, flesh tones appear greenish, and if a
smaller value is set, flesh tones appear purplish.
Gain adjustment
Brightness
When adjusted to
the + side
When adjusted
to the - side
Input signal
If you would like bright areas to
appear more clearly, change the
setting to the – side. If you change it
to the + side, bright areas will become
whiter, but the contrast will become
poorer.
Gamma adjustment
Brightness
When adjusted
to the + side
When adjusted
to the - side
Input signal
If the setting is changed to the – side,
smoother images can be obtained. If
the setting is changed to the + side,
sharper images can be obtained.
25