Yamaha YSP-600 Owner's Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Projector
  5. YSP-600
  6. Owner's manual

Yamaha YSP-600 Owner's Manual

Digital sound projector
Hide thumbs Also See for YSP-600:
Table of Contents

Advertisement

Quick Links

See also: Service Manual , Owner's Manual
UAB
YSP-600
Digital Sound Projector
TM
OWNER'S MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Yamaha YSP-600

Summary of Contents for Yamaha YSP-600

  • Page 1 YSP-600 Digital Sound Projector OWNER’S MANUAL...

  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. CAUTION Heed all warnings. Follow all instructions. RISK OF ELECTRIC SHOCK DO NOT OPEN Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with CAUTION: TO REDUCE THE RISK OF the manufacturer’s instructions.
  • Page 3 – and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late, Yamaha and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.
  • Page 4 Yamaha will not The wire which is coloured BLUE must be connected to the terminal be held responsible for any damage resulting from use of this unit which is marked with the letter N or coloured BLACK.

  • Page 5: Table Of Contents

    Contents Enjoying stereo sound.......... 51 INTRODUCTION Playing back sound clearly (My Beam)....52 Overview..............2 Using auto-adjust function........52 Using manual-adjust function......... 53 Features ..............3 Using the volume mode (Night listening Using this manual ..........5 enhancer/TV volume equal mode) ....54 Supplied accessories ..........

  • Page 6: Overview

    The YSP-600 projects sound beams containing surround sound information for the front right (R), front left (L), surround right (SR), and surround left (SL) speaker positions, which are reflected off the walls of your listening room before reaching the actual listening position.

  • Page 7: Features

    5.1 discrete channels to produce a directional and more My Surround is a function integrated and optimized with realistic effect. DiMAGIC’s Euphony technology and Yamaha’s Beam ◆ Dolby Pro Logic reproduction system. A surround system that takes a 4-channel signal and records it...
  • Page 8 Features The “ ” logo and “IntelliBeam” are trademarks of Yamaha Corporation. TruBass, SRS and the “ ” symbol are registered trademarks of SRS Labs, Inc. TruBass technology is incorporated under license from SRS Labs, Inc. Manufactured under license from Dolby Laboratories.

  • Page 9: Using This Manual

    Using this manual Using this manual Notes • This manual describes how to connect and operate this unit. For details regarding the operation of external components, refer to the supplied owner’s manual for each component. • Operations in this manual use keys on the supplied remote control of this unit unless otherwise specified. •...

  • Page 10: Supplied Accessories

    Supplied accessories Supplied accessories Check that you have received all of the following parts. Remote control (×1) IntelliBeam microphone Optical cable (×1) (×1) STANDBY/ON POWER POWER INPUT1 INPUT2 MACRO Cardboard microphone Digital audio pin cable (×1) AUTO VOL MODE SETUP INPUTMODE SLEEP stand (×1)

  • Page 11: Controls And Functions

    Controls and functions Controls and functions Front panel INTELLIBEAM MIC INPUT VOLUME STANDBY/ON INTELLIBEAM MIC INPUT STANDBY/ON – VOLUME 1 INTELLIBEAM MIC jack 5 VOLUME +/– Connect the supplied IntelliBeam microphone for AUTO Controls the volume level of all audio channels (see SETUP (see page 33).

  • Page 12: Front Panel Display

    Controls and functions Front panel display 3 4 5 1 HDMI indicator 8 MULTI indicator Lights up when the signal of the selected input source is Lights up when this unit detects a multi channel digital input at the HDMI IN jack(s). audio signal (see page 43).

  • Page 13: Rear Panel

    Connect your VCR via an analog connection (see A SYSTEM CONNECTOR jack page 23). Use to connect a Yamaha subwoofer equipped with a 5 TV/STB AUDIO INPUT jacks SYSTEM CONNECTOR jack to this unit (see page 25). Connect your TV, digital satellite tuner, or cable TV tuner B AC power supply cable via an analog connection (see pages 19 and 21).

  • Page 14: Remote Control

    Controls and functions Remote control 1 Infrared window This section describes the functions of the remote control used to control this unit. Some buttons marked with an Outputs infrared control signals. Aim this window at the asterisk (*) share the common functions between the YSP component you want to operate.
  • Page 15 Controls and functions H MACRO Use to set the TV macro (see page 80). I SLEEP Sets the sleep timer (see page 55). J INPUTMODE Toggles between input modes (AUTO, DTS, and ANALOG) (see page 73). K Beam mode buttons Change the beam mode settings (see pages 45, 51, and 52).
  • Page 16 Controls and functions 1 Numeric buttons This section describes the functions of the remote control used to control other components when the TV/AV mode Enter numbers. is selected with the operation mode selector (4). 2 Cursor buttons , ENTER Use to select DVD menu items. 3 MENU STANDBY/ON POWER...

  • Page 17: Installation

    Installation Installation This section describes a suitable installation location to install this unit using a rack. Depending on your installation environment, connections with external components can be done before installing this unit. We recommend that you temporarily place and arrange all components, including this unit, in order to decide which procedure should come first.

  • Page 18: Installation Examples

    Installation ■ Installation examples Example 1 Install this unit as close to the exact center of the wall as possible. Example 2 Install this unit so that the sound beams can be reflected off the walls. Example 3 Install this unit as close to the exact front of your normal listening position as possible.

  • Page 19: Using A Rack

    Installation ■ Using a rack Install this unit under your TV in a commercially available rack. This unit Note Make sure that the rack is large enough to allow adequate ventilation space around this unit (see page 13) and that it is strong enough to support the weight of both this unit and your TV.

  • Page 20: Connections

    Connections Connections This unit is equipped with the following types of audio/video input/output jacks/terminal: For audio input For audio output • 2 optical digital input jacks • 1 subwoofer output jack • 1 coaxial digital input jack For audio/video output •...

  • Page 21: Before Connecting Components

    Connections Before connecting components ■ Cables used for connections ■ Information on HDMI™ Audio signals Audio/Video Input source Audio signal type HDMI cable DVD video Dolby Digital, DTS, PCM 2-channel stereo DVD audio (up to 96 kHz/24 bit) Audio Blu-ray Disc Dolby Digital, DTS, PCM HD DVD Audio pin cable (supplied)

  • Page 22: Connections Using Hdmi Cables

    Connections Connections using HDMI cables This unit is equipped with 2 HDMI input jacks and 1 HDMI output jack. If your TV and other components have HDMI jacks, use HDMI cables for simpler and easier connections, and you can skip the connection procedures from page 19 to 21.

  • Page 23: Connecting A Tv

    Connections Connecting a TV For audio connection, connect the analog audio output jacks on your TV to the TV/STB AUDIO INPUT jacks on this unit. If your TV has an optical digital output jack, connect the optical digital output jack on your TV to the TV/STB OPTICAL DIGITAL INPUT jack on this unit.

  • Page 24: Connecting A Dvd Player/Recorder

    Connections Connecting a DVD player/recorder Connect the coaxial digital output jack on your DVD player/recorder to the DVD COAXIAL DIGITAL INPUT jack on this unit. When you connect this unit to your DVD/VCR combo player/recorder, connect the analog audio output jacks on your DVD/VCR combo player/recorder to the VCR AUDIO INPUT jacks on this unit in addition to the coaxial digital audio connection.

  • Page 25: Connecting A Digital Satellite Tuner Or A Cable Tv Tuner

    Connections Connecting a digital satellite tuner or a cable TV tuner Connect the optical digital output jack on your digital satellite tuner or cable TV tuner to the TV/STB OPTICAL DIGITAL INPUT jack on this unit. Connect the analog audio output jacks on your digital satellite tuner or cable TV tuner to the TV/STB AUDIO INPUT jacks on this unit.

  • Page 26: Connecting A Digital Airwave Tuner

    Connections Connecting a digital airwave tuner Connect the TV/STB AUDIO INPUT jacks on this unit to the analog audio output jacks on your TV. Connect the optical digital output jack on your digital airwave tuner to the TV/STB OPTICAL DIGITAL INPUT jack on this unit in addition to the analog audio connection.

  • Page 27: Connecting A Vcr

    Connections Connecting a VCR To connect a VCR, connect the analog audio output jacks on your VCR to the VCR AUDIO INPUT jacks on this unit. Connect red plugs to the right jacks and white plugs to the left jacks. Rear panel of this unit TV/STB SUBWOOFER...

  • Page 28: Connecting Other External Components

    Connections Connecting other external components If your component supports optical digital connections, connect the optical digital output jack on your component (e.g., DVD player/recorder) to the AUX OPTICAL DIGITAL INPUT jack on this unit. Rear panel of this unit TV/STB SUBWOOFER VIDEO TV/STB...

  • Page 29: Connecting A Subwoofer

    OUT in SUBWOOFER SET (see page 64). When connecting a Yamaha subwoofer equipped with a SYSTEM CONNECTOR terminal, connect it to the SYSTEM CONNECTOR terminal on this unit. If the subwoofer is connected using a system type connection, changing the power mode of this unit controls the power mode of the subwoofer.

  • Page 30: Connecting The Ac Power Supply Cable

    Connections Connecting the AC power supply cable Once all other connections are complete, plug the AC power supply cable into the AC wall outlet. To the AC wall outlet...

  • Page 31: Getting Started

    GETTING STARTED Getting started Installing batteries in the remote Remove the transparent sheet before using the remote control. control Press Operation range of the remote control The remote control transmits a directional infrared beam. Use the remote control within 6 m (20 ft) of this unit and point it toward the remote control sensor of this unit during operation.

  • Page 32: Turning On This Unit Or Setting It To The Standby Mode

    Getting started Turning on this unit or Press STANDBY/ON again to set this unit to setting it to the standby mode the standby mode. Note When this unit is in the standby mode, only STANDBY/ON on the front panel or on the remote control is operational, and the other control buttons on the front panel or on the remote control are not operational until the power of this unit is turned on.

  • Page 33: Using Set Menu

    Turn on the power of your TV. connected to the VIDEO OUT jack on this unit The following screen appears on your TV. to display the OSD of this unit. YSP-600 Press STANDBY/ON to turn on the power of this unit. STANDBY/ON...

  • Page 34: The Flow Chart Of Set Menu

    Using SET MENU The flow chart of SET MENU The following diagram illustrates the overall flow of the setup procedure. Run LANGUAGE SETUP. See “Changing OSD language” on page 31. Run AUTO SETUP (IntelliBeam). See “AUTO SETUP (IntelliBeam)” on page 32. If an error occurs Look for a remedy.

  • Page 35: Changing Osd Language

    CHANGING OSD LANGUAGE Changing OSD language This feature allows you to select the language of your choice that appears in SET MENU of this unit. Set the operation mode selector to YSP. Press to select the desired language, and press ENTER. TV/AV ENTER ENTER...

  • Page 36: Auto Setup (Intellibeam)

    AUTO SETUP (INTELLIBEAM) AUTO SETUP (IntelliBeam) This unit creates a sound field by reflecting sound beams on the walls of your listening room and by broadening the cohesion of all the channels. Just as you would arrange the speaker position of other audio systems, you need to set the beam angle to enjoy the best possible sound from this unit.

  • Page 37: Installing The Intellibeam Microphone

    AUTO SETUP (IntelliBeam) Installing the IntelliBeam microphone The supplied IntelliBeam microphone collects and analyzes the sound that this unit produces in your actual listening environment. Follow the procedure below to connect the IntelliBeam microphone to this unit and make sure that the IntelliBeam microphone is placed in a proper location and that there are no large obstacles between the IntelliBeam microphone and the walls in your listening room.

  • Page 38: Using Auto Setup (Intellibeam)

    AUTO SETUP (IntelliBeam) Using AUTO SETUP (IntelliBeam) Once the IntelliBeam microphone is firmly connected to this unit and properly placed in your listening room, follow the procedure below to start the AUTO SETUP procedure. You can also enter the AUTO SETUP procedure simply by pressing and holding AUTO SETUP for more than two seconds.
  • Page 39 AUTO SETUP (IntelliBeam) Notes Press MENU. The SET MENU screen appears on your TV. • Make sure that your listening room is as quiet as possible while this unit is performing the AUTO SETUP procedure. • To achieve the best results possible, evacuate yourself from SET MENU your listening room until the AUTO SETUP procedure is completed so that you may not obstruct the path of sound...
  • Page 40 AUTO SETUP (IntelliBeam) Press to select BEAM+SOUND Check the following points once again before OPTIMZ, BEAM OPTIMZ only, or SOUND starting the AUTO SETUP procedure. OPTIMZ only and then press ENTER. • Is the IntelliBeam microphone firmly connected to this unit? The following screen appears on your TV.
  • Page 41 AUTO SETUP (IntelliBeam) Check that the following screen is displayed Press ENTER to confirm the results or press on your TV. RETURN to cancel the results. The results of the AUTO SETUP procedure are The following screen is displayed for two seconds displayed on your TV.

  • Page 42: Error Messages For Auto Setup

    If position/connection and re-try. the problem persists, contact the nearest authorized Yamaha service center for assistance. ERROR E-7 An internal system error occurred. Repeat the AUTO SETUP procedure.

  • Page 43: Using The System Memory

    USING THE SYSTEM MEMORY Using the system memory Convenient usage of the system Press to select MEMORY and press memory ENTER. The following screen appears on your TV. You can save the current settings adjusted in SET MENU in the system memory of this unit. It is handy to save certain settings according to the varying conditions of your listening environment.

  • Page 44: Loading Settings

    Using the system memory Loading settings Press to select MEMORY1, MEMORY2, or MEMORY3 and press ENTER. You can recall the settings saved in “Saving settings” on The following screen appears on your TV. page 39 according to the varying conditions of your listening environment.
  • Page 45 Using the system memory Press to select LOAD and press Press ENTER again. ENTER. The new parameters saved as MEMORY1, MEMORY2, or MEMORY3 are loaded. Once the The following screen appears on your TV. parameters are loaded, the display returns to the SET MENU screen.

  • Page 46: Playback

    PLAYBACK Playback ■ Front panel operations Selecting the input source Press INPUT on the front panel repeatedly to You can play back sound from the components connected toggle between TV/STB, VCR, DVD, and AUX. to this unit simply by pressing INPUT on the front panel The name of the corresponding input source and the type repeatedly or pressing one of the input selector buttons of current input mode are displayed in the front panel...

  • Page 47: Playing Back Sources

    Playback Press VCR to play back a VCR. Switch to the video input on your TV using the remote control supplied with the TV and display the DVD menu screen. Note If necessary, turn down the volume of your TV until no sound is heard.

  • Page 48: Adjusting The Volume

    Playback ■ Muting the sound Adjusting the volume VOLUME TV VOL MUTE TV INPUT TV MUTE CODE SET Press MUTE to mute the sound. “AUDIO MUTE ON” appears in the front panel INPUT VOLUME STANDBY/ON display, and the volume level indicator flashes. MUTE VOLUME TV VOL...

  • Page 49: Enjoying Surround Sound

    ENJOYING SURROUND SOUND Enjoying surround sound You can enjoy multi-channel surround sound by changing the beam mode using the beam mode buttons on the remote control. Select 5 Beam, Stereo plus 3 Beam, 3 Beam, or My Surround for multi-channel playback. Notes •...

  • Page 50: Stereo Plus 3 Beam

    Enjoying surround sound Stereo plus 3 Beam You can achieve a more realistic surround effect if you adjust settings for IMAGE LOCATION in BEAM MENU (see page 63). Outputs normal sound from the front left and right Notes channels and sound beams from the center and surround left and right channels.
  • Page 51 Enjoying surround sound ■ Decoder indicators ■ Surround modes and recommended sources Depending on the input source and the selected surround mode, the decoder indicators in the front panel display Recommended light up as follows: Surround mode source Status Indicator Cinema Movies DTS Neo:6...

  • Page 52: Enjoying 2-Channel Sources In Surround Sound

    Enjoying surround sound Enjoying 2-channel sources Press SUR. DECODE repeatedly (or press in surround sound SUR. DECODE and then press ) to switch between surround modes. This unit can decode 2-channel sources for 5.1-channel Choices: Neo:6 Cinema, Neo:6 Music, PRO LOGIC, playback so that you can enjoy a variety of surround sound PLII Movie, PLII Music, PLII Game effects by switching the surround mode.

  • Page 53: Enjoying Tv In Surround Sound

    Enjoying surround sound Enjoying TV in surround sound If you hear sound from your TV speakers, reduce the volume level of your TV until you You can enjoy analog audio signals output from your TV can no longer hear any audio being output. in real surround sound.

  • Page 54: Adjusting Surround Mode Parameters

    Enjoying surround sound ■ When Dolby Pro Logic II Music is Adjusting surround mode selected parameters PANORAMA Gives the front left and right channel sound a You can configure the parameters for Dolby Pro Logic II wraparound effect, distributed throughout the entire Music and DTS Neo:6 Music to fine-tune the surround surround sound field to give you an expansive feeling.

  • Page 55: Enjoying Stereo Sound

    ENJOYING STEREO SOUND Enjoying stereo sound You can enjoy 2-channel stereo playback as the beam modes by pressing STEREO on the remote control. Sounds are output from the front right and left channels. This is ideal for playing back hi-fi sources, such as CDs, and can be used to replace your TV speakers.

  • Page 56: Playing Back Sound Clearly (My Beam)

    PLAYING BACK SOUND CLEARLY (MY BEAM) Playing back sound clearly (My Beam) You can improve listenability in a noisy environment by changing the beam mode to My Beam, which outputs sound beams directly toward the listening position in a single channel. In addition, My Beam is also ideal when you do not want the sound beams to be reflected on the walls in your listening room or when you do not want to disturb other people while enjoying music or movies at night.

  • Page 57: Using Manual-Adjust Function

    Playing back sound clearly (My Beam) Using manual-adjust function You can adjust the beam angle manually while playing back an input source. This function is also ideal if the listening position is out of the operation guarantee range of the auto-adjust function. Set the operation mode selector to YSP.

  • Page 58: Using The Volume Mode (Night Listening Enhancer/Tv Volume Equal Mode)

    USING THE VOLUME MODE (NIGHT LISTENING ENHANCER/TV VOLUME EQUAL MODE) Using the volume mode (Night listening enhancer/TV volume equal mode) The night listening enhancers are designed to improve listenability at lower volumes or at night. In addition, you can limit the volume level of the TV so that it will not vary suddenly to a great extent whenever the contents being broadcast change (i.e.

  • Page 59: Using The Sleep Timer

    USING THE SLEEP TIMER Using the sleep timer Use this feature to automatically set this unit to the standby mode after a specified period of time. The sleep timer is useful if you are going to sleep after a certain amount of time while this unit is still playing back a source. Each time you press SLEEP, the front panel display changes as shown below.

  • Page 60: Canceling The Sleep Timer

    Using the sleep timer ■ Canceling the sleep timer Set the operation mode selector to YSP. TV/AV Press SLEEP repeatedly until “SLEEP OFF” appears in the front panel display. SLEEP Wait for a few seconds without operating this unit to confirm the setting for the sleep timer. The SLEEP indicator disappears from the front panel display, indicating that the sleep timer is deactivated.

  • Page 61: Using The Hdmi Control Feature

    USING THE HDMI CONTROL FEATURE Using the HDMI control feature You can operate the following functions using the remote control supplied with your TV if this unit and an HDMI control-compatible TV (except some models) are connected via HDMI. • Turning on or off the power (synchronized operation with the TV) •...

  • Page 62: Manual Setup

    MANUAL SETUP MANUAL SETUP To achieve the best quality surround sound, you can use MANUAL SETUP to fine-tune the listening environment parameters, as well as to make advanced settings for sound signals, sound beams, digital input, and the OSD. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your own listening environment.

  • Page 63: Using Manual Setup

    MANUAL SETUP Using MANUAL SETUP Press to select MANUAL SETUP and press ENTER. Use the remote control to access and adjust each The following screen appears on your TV. parameter. SUR. DECODE ENTER ENTER CH LEVEL MENU TV/AV ENTER TEST RETURN ;MANUAL SETUP VOLUME...

  • Page 64: Beam Menu

    MANUAL SETUP ANGLE TO WALL BEAM MENU FLAT TO WALL OR CORNER Use to manually adjust the various parameters related to the sound beam output. SET MENU → MANUAL SETUP → BEAM MENU 2)BEAM MENU A)SETTING PARAMETERS B)BEAM ADJUSTMENT C)IMAGE LOCATION •...
  • Page 65 MANUAL SETUP ■ BEAM ADJUSTMENT (Beam adjustment) • Select ANGLE TO WALL OR CORNER if this unit is installed in the corner of your listening room. Adjust Use to manually adjust the various sound beam settings. the width and length of your listening room as well as We recommend that you select 5 Beam as the beam mode the distance of the listening position from this unit.
  • Page 66 MANUAL SETUP BEAM TRAVEL LENGTH (Beam travel length) FOCAL LENGTH (Focal length) A certain amount of delay must be applied to the sound Use to set the distance from the front of this unit to the from each channel so that all sounds can arrive at the focal point of output for each channel to achieve an listening position at the same time.
  • Page 67 MANUAL SETUP ■ IMAGE LOCATION (Image location) TREBLE GAIN (Treble gain) Use to adjust the high-frequency output level of each Use to adjust the direction from which the front left and channel. right channel sound is heard so that each sound can be heard closer to the center channel.

  • Page 68: Sound Menu

    MANUAL SETUP BASS OUT (Bass out) SOUND MENU Low-frequency (bass) signals can be directed to the subwoofer or the front left and right channels. This setting Use to manually adjust the various parameters related to also determines the routing of LFE (low-frequency effect) the sound output.
  • Page 69 MANUAL SETUP ■ AUDIO DELAY (Audio delay) ■ TruBass Use to delay the sound output and synchronize it with the Use to turn on or off the bass sound enhancer. The SRS video image. This may be necessary when using certain TruBass technology improves bass even without a LCD monitors or projectors.

  • Page 70: Input Menu

    MANUAL SETUP ■ INPUT TRIM (Input trim) INPUT MENU Use to adjust the input level of the input source. Use to manually adjust the various parameters related to the audio and video input. B)INPUT TRIM SET MENU → MANUAL SETUP → INPUT MENU TV/STB ANALOG;;;-3.0dB DIGITAL;;-3.0dB...
  • Page 71 The _ (underscore) flashes. Use to select whether to play back HDMI audio signals on this unit or on another HDMI component connected to the HDMI OUT jack of this unit. Choices: YSP-600, OTHER ENTER a)SUPPORT AUDIO Press to select the desired character.
  • Page 72 MANUAL SETUP AUDIO SELECT (Audio select) HDMI CONTROL (HDMI control) Use this feature if your player/tuner connected to one of Use this function to link this unit and an HDMI control- the HDMI jacks on this unit outputs multi-channel audio compatible TV via HDMI.

  • Page 73: Display Menu

    MANUAL SETUP ■ OSD SET (OSD settings) DISPLAY MENU Use to adjust the display position and to set the display time of the OSD. Use to manually adjust the various parameters related to the display. SET MENU → MANUAL SETUP → DISPLAY MENU B)OSD SET OSD SHIFT;;;;;;;;;;0 4)DISPLAY MENU...

  • Page 74: Adjusting The Audio Balance

    Adjusting the audio balance Adjusting the audio balance You can adjust the sound beam output level of each channel by using the test tone or the audio output being played back in each beam mode to achieve a more true-to-life surround sound experience. Using the test tone Press to select the channel you want...

  • Page 75: Using The Audio Output Being Played Back

    Adjusting the audio balance Press TEST when you have completed all Set the operation mode selector to YSP. your adjustments. TV/AV TEST Press CH LEVEL repeatedly (or press CH LEVEL and ) to select the channel Notes you want to adjust. The front panel display changes as follows: •...
  • Page 76 Adjusting the audio balance Press to adjust the channel volume. ENTER Control range: –10.0 dB to +10.0 dB Wait for a few seconds without operating this unit when you have completed your adjustment. Notes • All channel levels cannot be adjusted when the stereo playback (see page 51), or My Surround (see page 46) is selected as the beam mode.

  • Page 77: Selecting The Input Mode

    Selecting the input mode Selecting the input mode You can select the type of audio input signals of the selected input source according to your preference or the conditions of the input source. This function is available for TV/STB, DVD, and AUX. We recommend setting the input mode to AUTO in most cases.

  • Page 78: Adjusting The System Parameters

    Adjusting the system parameters Adjusting the system parameters This unit has additional menus that are displayed in the front panel display. These menus offer additional operations to adjust and customize the way this unit operates. Note When “F.PANEL KEY” is set to “F.PANEL: OFF” (see page 75), STANDBY/ON on the front panel is ineffective. Use STANDBY/ON on the remote control instead to adjust the system parameters.

  • Page 79: Demo Mode

    Adjusting the system parameters Parameter to be changed and front panel display Parameter settings MEMORY PROTECT ON, OFF You can protect the settings you saved in the system memory of this unit from being accidentally erased or unwantedly changed. MAX VOLUME MAX, 99 to 01, MIN You can set the maximum volume level so that this unit will not output sound beyond the Control step: 1...

  • Page 80: Remote Control Features

    Remote control features In addition to controlling this unit, the remote control can also operate other AV components made by Yamaha and other manufacturers. To control other components, you must set up the remote control with the appropriate remote control codes and set the operation mode selector to TV/AV to change the control area.

  • Page 81: Controlling Other Components

    Remote control features Controlling other components ■ Operating your TV 1 Numeric buttons Selects a TV channel for playback. Set the operation mode selector to TV/AV, and 2 CH +/– press TV to select TV as the input source. Switches between the available TV channels. The control area of the remote control changes to the TV operation mode.
  • Page 82 Remote control features ■ Operating your DVD player/recorder ■ Operating your STB (CATV/Satellite tuner) Set the operation mode selector to TV/AV and press DVD to select DVD as the input source. Set the operation mode selector to TV/AV and The control area of the remote control changes to the DVD press STB to select STB as the input source.
  • Page 83 Remote control features ■ Operating your VCR Set the operation mode selector to TV/AV and press VCR to select VCR as the input source. The control area of the remote control changes to the VCR operation mode. TV/AV STANDBY/ON POWER POWER MACRO INPUT1...

  • Page 84: Using The Tv Macro

    Remote control features ■ Setting macros for the TV with the Using the TV macro tuning capability The TV macro feature makes it possible to perform a Press and hold CODE SET and press one of series of operations with the press of a single button. For the input selector buttons to select the input example, when you want to play a DVD, you would source you want to set macros for.
  • Page 85 Remote control features ■ Setting macros for the TV without the ■ Operating macros tuning capability Press and hold one of the input selector buttons Press and hold CODE SET and press one of for approximately two seconds to select the input the input selector buttons to select the input source you want to operate macros for.

  • Page 86: Troubleshooting

    Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the AC power supply cable, and contact the nearest authorized Yamaha dealer or service center. ■ General...
  • Page 87 2-channel audio signals at the source component such as a DVD player. “SUPPORT AUDIO” is set to “YSP-600”. Set “SUPPORT AUDIO” to “OTHER”. There is noise interference This unit is too close to the digital or high- Move this unit farther away from such —...
  • Page 88 Troubleshooting ■ Remote control Problem Cause Remedy page The remote control does not Wrong distance or angle. The remote control functions within a work and/or function maximum range of 6 m (20 ft) and no more properly. than 30 degrees off-axis from the front panel.

  • Page 89: Glossary

    Glossary Glossary ■ Dolby Digital ■ DTS Digital Surround Dolby Digital is a digital surround sound system that gives DTS digital surround was developed to replace the analog you completely independent multi-channel audio. With 3 soundtracks of movies with a 6-channel digital sound front channels (left, center, and right) and 2 surround track, and is now rapidly gaining popularity in movie stereo channels, Dolby Digital provides 5 full-range audio...

  • Page 90: Lfe 0.1-Channel

    Glossary ■ LFE 0.1-channel This channel is for the reproduction of low bass signals. The frequency range for this channel is 20 Hz to 120 Hz. This channel is counted as 0.1 because it only enforces a low-frequency range compared to the full-range reproduction by the other 5/6 channels in Dolby Digital or DTS 5.1/6.1-channel systems.

  • Page 91: Index

    Index Index ■ Numerics ■ M 3 Beam ................46 MANUAL SETUP ............58 5 Beam ................45 MEMORY ...............39 My Beam.................52 ■ A ■ N AC power supply cable ........... 26 Audio pin cable............... 17 Night listening enhancer ..........54 AUTO SETUP (IntelliBeam).......... 32 ■...

  • Page 92: Specifications

    Specifications Specifications AMP SECTION GENERAL • Power Supply • Maximum Output Power [U.S.A. and Canada models] ......AC 120 V, 60 Hz ..........2 W (1 kHz, 10% THD, 4 Ω) × 16 – [Australia model] ........AC 220 240 V, 50/60 Hz 15 W (100 Hz, 10% THD, 4 Ω) ×...
  • Page 93 (http://www.yamaha-hifi.com/ or http://www.yamaha-uk.com/ for U.K. resident). The product is guaranteed to be free from defects in workmanship or materials for a period of two years from the date of the original purchase. Yamaha undertakes, subject to the conditions listed below, to have the faulty product or any part(s) repaired, or replaced at Yamaha’s discretion, without any charge for parts or labour.

  • Page 94: List Of Remote Control Codes

    List of remote control codes PROSCAN 293, 221 YAMAHA 699, 622, 623, PANASONIC 325, 328, 339, PROSCAN 231, 241, 251 647, 682 355, 378, 384, ADMIRAL 292, 293, 216 PROTON 297, 250, 260, 270 ZERITH 663, 664 385, 386 AIWA...
  • Page 95 MOTOROLA 739, 742, 743 PANASONIC 744, 745, 746, 747, 783, 784 PHILLIPS 763, 764, 765, 766, 767, 768 PIONEER 748, 785, 747 RADIO SHACK749 SCIENTIFIC ATLANTA 752, 753, 754 SONY 756, 757 TOCOM UNIVERSAL 769, 772, 773, 774, 775 VIEWSTAR 764, 766, 776, 777, 778, 779, 782 SATELLITE TUNER...
  • Page 96 YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN YAMAHA MUSIC AUSTRALIA PTY. LTD. LEVEL 1, 99 QUEENSBRIDGE STREET, SOUTHBANK, VIC 3006, AUSTRALIA...
  • Page 97 TV digital audio sounds to this unit) Supplied HDMI cable (sold separately) OSD video pin cable (supplied) Installing this unit (Displays the YSP-600 menu screen on the TV) (Inputs the DVD digital audio/video signals to this unit) Audio pin cable Optical cable...
  • Page 98 Continued from the front Turn on the power of your TV. Press ENTER to start the AUTO Carry out the AUTO SETUP (IntelliBeam) Enjoying surround sound SETUP procedure, and then leave the room within 10 seconds. Select the appropriate video input Carry out the AUTO SETUP to adjust the settings that best match your listening Enjoy TV or DVD digital audio in surround sound.

Table of Contents