Rear; Base - Yamaha LPX-510 Owner's Manual

Rear

D4 VIDEO port ( Setup Guide)
Connects to the component video ports or D
port of other video equipment.
(Japan only)
INPUT A/INPUT B ports ( Setup Guide)
Connects to the component video ports or RGB
ports of other video equipment or to a
computer's video output port.
HDMI port ( Setup Guide)
Connects to video equipment or a computer that
is HDMI-compatible.
VIDEO port ( Setup Guide)
Connects to general video ports of other video
equipment.
S VIDEO port ( Setup Guide)
Inputs an S-Video signal to the projector from
other video equipment.

Base

G / Y B / P E: /C E: R/ P R: /C R: HD/SYNC VD
D4 VIDEO
G / Y B / P E: /C E: R/ P R: /C R: HD/SYNC VD
Suspension bracket fixing points (4 points) (p.58)
Attach the optional ceiling mount here when suspending the projector from a ceiling.
Part Names and Functions
INPUT A
HDMI
VIDEO
S VIDEO
INPUT B
RS-232C
Remote control light-receiving area
( Setup Guide)
Receives signals from the remote control.
Power inlet (p.6, 9)
Connects the power cord.
RS-232C port
Connects to the projector to a computer using an
RS-232C cable.
This port is for service use, and should not
normally be used.
TRIGGER OUT port (p.34)
This is for output of signals that are used by an
external device to control the projector.
Air Filter (air inlet)
(p.51)
Prevents dust and other foreign
particles from being drawn into the
projector. It should be cleaned
periodically.
65