Eu Declaration Of Conformity; Operator Safety - Hardi DEMOUNT Instruction Book

EU Declaration of Conformity

Manufacturer,
HARDI INTERNATIONAL A/S
Helgeshøj Allé 38
DK 2630 Taastrup
DENMARK
Importer,
declare that the following product;
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Adhere extra shipping package labels to inside cover.
A. was manufactured in conformity with the provisions in
the COUNCIL DIRECTIVE of 14 June 1989 on mutual
approximation of the laws of the Member States on the
safety of machines (89/392/EEC as amended by direc-
tives 91/368/EEC and 93/368/EEC) with special reference
to Annex 1 of the Directive on essential safety and health
requirements in relation to the construction and manufac-
ture of machines.
B. was manufactured in conformity with the standards
current at that time that implements a harmonised stan-
dard in accordance with Article 5 (2) and other relevant
standards.
Taastrup 1.8.95
Erik Holst
Managing Director
HARDI INTERNATIONAL A/S
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Operator safety

WARNING, CAUTION, NOTE. Your safety is
involved so be alert!
Note the following recommended precautions and
safe operating practices.
Read and understand this instruction book before
using the equipment. It is equally important that
other operators of this equipment read and under-
stand this book.
Local law may demand that the operator must be
certified to use spray equipment. Adhere to the law.
Pressure test with clean water prior to filling with
chemicals.
Wear protective clothing.
○ ○ ○ ○ ○
Rinse and wash equipment after use and before
○ ○ ○ ○ ○
servicing.
Depressurize equipment after use and before
servicing.
Never service or repair the equipment whilst it is
operating.
Disconnect electrical power before servicing.
Always replace all safety devices or shields imme-
diately after servicing.
If an arc welder is used on the equipment or any-
thing connected to the equipment, disconnect
power leads before welding. Remove all inflam-
mable or explosive material from the area.
Do not eat, drink or smoke whilst spraying or
working with contaminated equipment.
Wash and change clothes after spraying.
Wash tools if they have become contaminated.
In case of poisoning, seek doctor or ambulance.
Remember to identify chemicals used.
Keep children away from the equipment.
Do not attempt to enter the tank.
Do not stand on the sprayers platform during
driving or spraying.
Do not go under any part of the sprayer unless it is
secured. The boom is secure when placed in the
transport brackets.
Do not use the step unless the sprayer is con-
nected to the tractor or the sprayer is correctly
placed on a hard, flat surface.
Demount
Watch for this symbol . It means
3