Table of Contents
Advertisement
ST-292 User's manual
V.c.7) Pre-set comfort temperature
Pre-set comfort temperature is used in weekly control mode and day/night mode. Press
MENU button until the comfort temperature change panel appears on the screen.
Press
or
to set the desired temperature.
Press MENU to confirm and move on to the next
parameter or press EXIT to confirm and return to
the main screen view.
V.c.8) Pre-set economical temperature
Pre-set economical temperature is used in weekly control mode and day/night mode.
Press MENU button until the economical temperature change panel appears on the
screen.
Press
or
to set the desired temperature.
Press MENU to confirm and move on to the next
parameter or press EXIT to confirm and return to
the main screen view.
V.c.9) Pre-set temperature hysteresis
Room temperature hysteresis defines the pre-set temperature tolerance in order to
prevent undesired oscillation in case of small temperature fluctuation (within the range
of 0,2 ÷ 4°C).
Example:
Pre-set temperature : 23°C
Hysteresis : 1°C
The room regulator reports that the temperature is too low only when the room
temperature drops to 22 °C.
In order to set the hysteresis, press MENU until the
hysteresis setting appears on the screen.
Use
or
to set the desired hysteresis value.
Press MENU to confirm and move on to the next
parameter or press EXIT to confirm and return to
the main screen view.
V.c.10) Selecting wireless communication
channel (ST-292v2)
ST-292v2 regulator communicates with the heating
device or the CH boiler controller using radio waves
(via the receiver). In order to ensure effective
communication, the same channel needs to be
selected in both the controller and the receiver (in
the case of using an external sensor, it is necessary
to set the same communication channel in this
device as well). "35" is the default channel in all
devices. The channel must be changed only if there
is a conflict with other devices using radio communication.
15
Advertisement
Table of Contents
