Steps
1. Using the alignment posts and rubber grommets, place the speakers in the slots on the palm rest.
2. Route the speaker cable through the routing guides on the palmrest.
3. Connect the speaker cable to the connector on the system board .
Next steps
1. Install the SSD.
2. Reconnect the
battery
3. Install the
base
cover.
4. Install the
SD
card.
5. Follow the procedure in
IO board
Removing the IO board
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Disconnect the
battery
46
Disassembly and reassembly
cable.
after working inside your
before working inside your
cable.
computer.
computer.