About this task
Steps
1. Using the alignment post, adhere the camera module on the display back-cover and antenna assembly.
2. Connect the camera cable to the camera module.
Next steps
1. Install the
display
panel.
2. Install the
display
bezel.
3. Install the
display
assembly.
4. Install the WLAN.
5. Connect the
battery
cable.
6. Install the
base
cover.
7. Install the
SD
card.
8. Follow the procedure in
Display panel
Removing the display panel
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the battery.
5. Remove the WLAN.
6. Remove the
display
assembly.
7. Remove the
display
bezel.
after working inside your
before working inside your
computer.
computer.
Disassembly and reassembly
61