Display Bezel; Removing The Display Bezel - Dell Vostro 3401 Service Manual

Hide thumbs Also See for Vostro 3401:
Table of Contents

Advertisement

3. Re-route the display cable and WLAN antenna cables through the routing channels on the palmrest.
4. Reconnect the display cable to the connector on the system board.
Next steps
1. Install the WLAN.
2. Install the
base
cover.
3. Install the
SD
card.
4. Follow the procedure in

Display bezel

Removing the display bezel

Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the
battery
cable.
5. Remove the
display
assembly.
About this task
Steps
1. Pry open the display bezel from the inner edge at the left and right sides of the display assembly.
after working inside your
before working inside your
computer.
computer.
Disassembly and reassembly
55

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents