Battery; Lithium-Ion Battery Precautions; Disconnecting The Battery - Dell Vostro 3401 Service Manual

Steps
1. Align and place the base cover on the computer, press the edges and sides of the base cover until it snaps into place.
2. Tighten the seven (M2.5x5) screws and the two captive screws to secure the base cover to the computer.
Next steps
1. Replace the SD card
2. Follow the procedure in

Battery

Lithium-ion battery precautions

CAUTION:
● Exercise caution when handling Lithium-ion batteries.
● Discharge the battery as much as possible before removing it from the system. This can be done by
disconnecting the AC adapter from the system to allow the battery to drain.
● Do not crush, drop, mutilate, or penetrate the battery with foreign objects.
● Do not expose the battery to high temperatures, or disassemble battery packs and cells.
● Do not apply pressure to the surface of the battery.
● Do not bend the battery.
● Do not use tools of any kind to pry on or against the battery.
● Ensure any screws during the servicing of this product are not lost or misplaced, to prevent accidental
puncture or damage to the battery and other system components.
● If the battery gets stuck inside your computer as a result of swelling, do not try to release it as puncturing,
bending, or crushing a lithium-ion battery can be dangerous. In such an instance, contact Dell technical
support for assistance. See www.dell.com/contactdell.
● Always purchase genuine batteries from

Disconnecting the battery

Prerequisites
1. Follow the procedure in
2. Remove the SD card.
3. Remove the base cover.
24 Disassembly and reassembly
after working inside your computer
before working inside your computer
www.dell.com or authorized Dell partners and resellers.