Storage; Terms Of Purchase - Stiga Park series 2WD Instruction Manual

EN

11 STORAGE

1 . Empty the fuel tank:
Start the machine's engine and leave it
•
running until it stops.
2 . Change the oil when the engine is still warm.
3 . Thoroughly clean the whole machine. It is
particularly important to clean the bottom
side of the cutting device assy.If the paint-
work is damaged, touch it up to prevent rust.
4 . Place the machine in a covered, dry place.
If the storage temperature is correct, simply rechar-
ge the batter every four months.
Charge the battery before putting the
machine into storage . The battery can
be seriously damaged it if is put into
storage flat.
20
ENGLISH

12 TERMS OF PURCHASE

The warranty covers all material and manufacturing
defects. The user must follow all the instructions
provided in the accompanying documentation.
The warranty does not cover damages caused by:
• failure to become familiar with the documenta-
tion accompanying the machine,
• carelessness,
• incorrect or prohibited use or assembly,
• use of non-genuine spare parts,
• use of accessories not supplied or approved
by GGP.
The warranty does not cover:
• normal wear and tear of consumables, such as
drive belts, headlights, wheels, bolts and wires.
• normal wear and tear
• engines. Engines are covered by the war-
ranty provided by the relative manufacturer
in compliance with the specified terms and
conditions.
The purchaser is protected by his own national
legislation. The purchaser's rights envisaged by
the national laws in his own country are not in any
way restricted by this warranty.
(Translation of the Original Instructions)