Husqvarna R 419TsX AWD Operator's Manual page 33

Problem
The transmission does not have
sufficient power
The battery does not charge
There is vibration in the product
The cutting result is unsatisfacto-
ry
Display - Troubleshooting
Symbol
880 - 006 - 09.09.2020
Cause
The cold air intake of the transmission or the cooling fins are blocked.
The fan on the transmission is damaged.
There is no oil in the transmission or the oil level is too low. Refer to
check of the transmission oil level on page 30 .
The battery is defective. Refer to
The connection at the cable connectors on the battery terminals is bad. Refer to
To charge the battery on page 24 .
The blades, the pulley or other rotating parts are loose. Refer to
page 19 .
One or more of the blades are not balanced. Refer to
page 28 .
The engine is loose.
The blades are blunt. Refer to
The grass is long or wet. Refer to
The cutting deck is damaged and not parallel to the ground.
There is grass blockage in the cutting deck. Refer to
page 20 .
The tire pressure is different on the right and left sides. Refer to
page 25 .
The product is operated at a too high ground speed. Refer to
ting result on page 18 .
The engine speed is too low. Refer to
The drive belt loosens from the pulleys.
Name Shows on the display
The symbol shows.
Slope indicator
The symbol flashes.
The symbol shows.
Indicator of the trans-
mission oil tempera-
The symbol flashes
ture
quickly.
Oil Pressure Sensor The symbol shows.
To charge the battery on page 24 .
To examine the blades on
To replace the blades on page 28 .
To get a good cutting result on page 18 .
To clean the product on
To get a good cutting result on page 18 .
Sound Cause
You operate the product in a
- slope >10°. Refer to
on slopes on page 12 .
You operate the product in a
- slope >15°. Refer to
on slopes on page 12 .
1 long The transmission oil temperature
sound. is too high.
Speak to your Husqvarna servic-
-
ing dealer.
Low oil pressure. Refer to
1 long
a check of the engine oil level on
sound.
page 28 .
To do a
Maintenance on
Tire pressure on
To get a good cut-
To cut grass
To cut grass
To do
33