Selecting & Playing Voices; Select A Voice - Yamaha YDP-121 Owner's Manual

Selecting & Playing Voices
POWER
MASTER VOLUME
MIN MAX
GRAND HARPSI-
PIANO E.PIANO CHORD STRINGS
ROOM
HALL1
REVERB
HALL2
STAGE
Turn Power On
After making sure that the YDP-121's AC cord is properly plugged
into the YDP-121 itself and plugged into a convenient AC wall outlet,
press the [POWER] switch located to the right of the keyboard to turn
the power ON. In some areas a plug adaptor may be provided to match
the pin configuration of the AC wall outlets in your area.
When the power is turned ON, one of the voice selector LEDs will
light, and the power indicator located below the left end of the key-
board will light.
Set the Volume
Initially set the [MASTER VOLUME] control about half way
between the "MIN" and "MAX" settings. Then, when you start playing,
re-adjust the [MASTER VOLUME] control for the most comfortable
listening level.

Select a Voice

Select the desired voice by pressing one of the voice selectors. Use
the [VARIATION] button to select a variation of the current voice, as
required.
PIPE
ORGAN VARIATION
Play
................................................................................................................................
The YDP-121 also offers keyboard touch response, so the volume
and timbre of notes played can be controlled according to how "hard"
you play the keys. The amount of variation available depends on the
selected voice.
Add Reverb As Required
You can add or change reverb as desired by using the [REVERB]
button (page 15).
...................................................................................................
..................................................................................................
.....................................................................................................
.......................................................................
9
YDP-121