The Function Mode; To Select A Function - Yamaha YDP-121 Owner's Manual

The Function Mode

YDP-121 extraordinary versatility. The functions are categorized in groups as
follows:
TEMPO FUNCTION
FUNCTION
TEMPO FUNCTION
FUNCTION
Operation Example
Press [+/YES]
Use FUNCTION [<], [>]
Press [–/NO] or [+/YES]
once
Use [–/NO], [+/YES]
The [FUNCTION] button provides access to a range of functions that give the
F1 Tuning ...................................................................... 24
F2 Scale ......................................................................... 24
F3 Dual Mode Functions .............................................. 25
F4 Left Pedal Mode....................................................... 26
F5 Metronome Volume ................................................. 26
F6 Piano Song Part Cancel Volume ............................ 26
F7 Backup Functions ................................................... 27

To Select a Function ... ..............................................

Z
Press the [FUNCTION] button so that its indicator lights.
X
Use the FUNCTION [< < < < < ] and [> > > > > ] buttons to select the desired
function.
C
In the case of the Scale (F2), Dual Mode (F3), and Backup (F7)
functions, you will have to press the [+/YES] button once to enter
the respective sub-mode after the function has been selected, and
then use the FUNCTION [< < < < < ] and [> > > > > ] buttons again to select the
desired sub-function.
(sub-mode)
V
Set the function as required by using the [–/NO] and [+/YES]
buttons (see the individual function descriptions, below).
B
Press the [FUNCTION] button so that its indicator goes out to exit from
the function mode.
• Functions cannot be selected during demo/piano song playback or when
the recorder is in operation.
• The Dual mode must be engaged before the F3 function can be selected.
If the Dual mode is not engaged, "F3.-" will appear on the display and the
Dual sub-mode will not be available.
• After selecting the function, the current setting will be displayed when the
[–/NO] or [+/YES] button is pressed for the first time.
23
YDP-121