Advertisement
Quick Links
Advertisement
Related Manuals for NORTH STATES 4956
Summary of Contents for NORTH STATES 4956
-
Page 2: Important Safety Information
Page 2 IMPORTANT! READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE Important Safety Information • There is a gap between your gate frame and right upper corner. This is not a defect. The gap will close once it is properly mounted. -
Page 3: Installation
Page 3 Installation Step 1 • Measure width of the opening. 1A, 1B, 1C to determine the correct installation. 28 7/10”– 30 7/10” 31 7/8”– 34 1/4” 35 7/8”– 38 2/8” (72.9 – 78 cm) (81 – 87 cm) (91 – 97 cm) No Extensions With 1 Extension With 2 Extensions... -
Page 4: Operation
Page 4 Step 4 • Tighten both of the bottom tension nuts 4A by turning them clockwise at the same time 4B. • Tighten both of the upper tension knobs 4C by turning them clockwise at the same time, so the gap between tighten inward gate frame... -
Page 5: Led Light
Page 5 LED light • To activate the pre-installed battery, remove the small tab from the LED socket (see figure 6A), dispose out of reach of child. • To activate the pre-installed battery, remove the film from the LED socket (see figure 6A). •... - Page 6 CLEANING: Clean the safety gate using warm water and a mild detergent. Use a soft cloth or sponge to avoid scratches. Never use solvents or chemicals to clean the safety gate. Distributed in the United States by North States Industries, Inc. 5455 Highway 169 N Plymouth, MN 55442 www.northstatesind.com...