Advertisement
Quick Links
Quality Products
for the way you live
INSTRUCTIONS FOR MODEL
4928
IMPORTANT: PLEASE KEEP FOR FUTURE REFERENCE!
For helpful tips and instructions, please visit our website: www.northstatesind.com or
contact our Customer Care department via email: CustomerService@northstatesind.com
Phone: (763) 486-1756 or Toll Free: (800) 848-8421
Intended for use with children 6-24 months
Advertisement
Related Manuals for NORTH STATES 4928
Summary of Contents for NORTH STATES 4928
- Page 1 Quality Products for the way you live INSTRUCTIONS FOR MODEL 4928 IMPORTANT: PLEASE KEEP FOR FUTURE REFERENCE! For helpful tips and instructions, please visit our website: www.northstatesind.com or contact our Customer Care department via email: CustomerService@northstatesind.com Phone: (763) 486-1756 or Toll Free: (800) 848-8421...
- Page 2 Lower Wall Mount with Pin Gate Frame To ensure safe operation, additional or replacement parts should be obtained only from North States or its authorized distributors. Contact information appears on the cover of these instructions. Replacement parts can be ordered at www.northstatesind.com...
-
Page 3: Installation
Page 3 1. MEASURE OPENING 72" 38 1/3” Wall Wall Wall Wall OPENING OPENING The gate can easily be adjusted to accommodate openings from 38 1/3" to 72" as shown above. If the opening is smaller than 72" you will need to angle the gate at the pivot points to fit the opening. Installation WARNING: When installing at the Top of the Stairs Do not mount hinges into sheetrock or plaster. -
Page 4: Operation
Page 4 3. SECURING GATE PANELS FIGURE 3 Rotate both removable vertical bars counterclockwise until they are tight. Note: Release by turning the removable vertical bar clockwise prior to folding or moving the gate. Operation TO OPEN THE ENTIRE BARRIER FIGURE 4A FIGURE 4B FIGURE 4C... - Page 5 Page 5 TO OPEN AND CLOSE THE DOOR FIGURE 6A Press and hold the door release Lift the door panel upward. Swing door open and release button. button. While the door is open, release it and it will close automatically. NOTE: To ensure safety, always check to make certain that the gate is securely locked after it has been closed.
- Page 6 Page 6 Lock Troubleshooting and Adjustment If the lock alignment indicators do not line up as in figure 9D, please make the following adjustments to make sure that the door panel an be auto-closed. If the mark on the upper locking housing is displaced to the left (9A) or right (9B) then: Loosen the screw on the upper locking housing as shown in figure 9C adjust the gate until the marks are aligned as shown in figure 9D.
-
Page 7: Important Safety Cautions
Page 7 CARE CLEANING: Clean the safety gate using warm water and a mild detergent. Use a soft cloth or sponge to avoid scratches. Never use solvents or chemicals to clean the safety gate. IMPORTANT SAFETY CAUTIONS 1. Do not use the product if any components are broken or missing. Do not use replacement parts other than those approved by the manufacturer or distributor. - Page 8 Page 8 Distributed exclusively in the United States by North States Industries, Inc. 5455 Highway 169 N Plymouth, MN 55442 www.northstatesind.com Manufactured in China Rev 9/2019...