Output Eq - Yamaha SP2060 Owner's Manual

Panel Operation
1.
Press the [EQ] key repeatedly to select the
EQ display.
IN A
ON/OFF =
2.
Press the [SEL] key for the target channel.
The [SEL] key LED of the selected channel lights up,
and the corresponding channel name is displayed.
Pressing the [SEL] keys for channels A and B will turn on
the [SEL] key LEDs and select channel SUM.
IN SUM
ON/OFF =
3.
Press the [EQ], [BACK] or [NEXT] key to
display the On/Off parameter.
4.
Press the [▲INC] key to set the On/Off
parameter to On to apply EQ to the signal.
Press the [▼DEC] key to set the On/Off
parameter to Off to not process the signal.
5.
Press the [BACK] or [NEXT] key to select the
Bypass, Type, Q, Freq, or Gain parameter.
IN SUM
Q =
6.
Pressing the [EQ] key repeatedly will scroll
the bands from 1 through 8.
IN SUM
Q =
7.
Press the [▲INC]/[▼DEC] keys to select the
value.
ON
ON
BAND 2
0.125
BAND 3
0.125

Output EQ

You can apply a 6-band EQ to Output channels 1–6.
Set the On/Off parameter to On to apply EQ to the signal,
and Off to not process the signal.
The parameters are the same as for the input EQ.
You can set the following parameters for each band.
Parameter Range
BYPASS ON/OFF
PEQ
L.SHELF 6dB/Oct
L.SHELF 12dB/Oct
H.SHELF 6dB/Oct
H.SHELF 12dB/Oct
TYPE
HPF
LPF
APF 1st
APF 2nd
Horn
Q 63.0–0.1
FREQ
20.0Hz–20.0kHz
(Frequency)
–18dB through
GAIN
+18.00dB
• APF (All Pass Filter)
This filter passes all ranges of frequency, but changes only
the phase. It is used to align the phase in the crossover
range.
APF 1st rotates the phase by 0 through 180 degrees, and
APF 2nd rotates the phase by 0 through 360 degrees. APF
2nd requires the Q setting.
• Horn
A horn speaker typically features a roll-off in the higher
frequency component.
Horn EQ corrects this characteristics. For this purpose,
the gain is limited to 0dB or higher, and the frequency to
500Hz or higher.
Function
Sets the bypass
for each
frequency range
to On or Off.
Selects a type of
filter.
Specifies the
width of each
frequency range.
Specifies the
frequency of each
band.
Sets the gain of
the target
frequency.
SP2060 Owner's Manual
25