Input/Output Characteristics; Dimensions - Yamaha MTX3 Owner's Manual



Input/Output Characteristics

ANALOG INPUT CHARACTERISTICS
Input
GAIN
Terminals
+66dB
INPUT 1–8
-6dB
ST IN 1, 2 —
• In these specifications, 0dBu = 0.775 Vrms., 0dBV = 1.00 Vrms.
• All input AD converters are 24bit linear, 128times oversampling.
• +48V DC (phantom power) is supplied to INPUT EUROBLOCK connectors via each individual software controlled switch.
ANALOG OUTPUT CHARACTERISTICS
Output Terminals
OUTPUT 1–8
• In these specifications, 0dBu = 0.775 Vrms.
• All output DA converters are 24bit, 128times oversampling.


Dimensions

Actual Load For Use With
Impedance Nominal
50–600Ω Mics
10kΩ
& 600Ω Lines
10kΩ 600Ω Lines
Actual Load For Use With
Impedance Nominal
75Ω 10kΩ Lines
430
480
Input Level
Nominal Max. before clip
-62dBu (0.616mV) -42dBu (6.16mV)
+10dBu (2.45V) +30dBu (24.5V)
-10dBV (316mV) +10dBV (3.16V)
Output Level
Nominal Max. before clip
+4dBu (1.23 V) +24dBu (12.3V)
Appendix
Connector
Euroblock (Balanced)
(5.08mm pitch)
RCA Pin Jack
Connector
Euroblock (Balanced)
(5.08mm pitch)
Unit: mm
23
MTX3 Owner's Manual