Multi Pad Creator - Yamaha PSR-9000 Owner's Manual

Multi Pad Creator

The PSR-9000 has 58 recordable banks that you can use to store your own Multi Pad phrases. These
original Multi Pads can be played and used in the same way as the presets. Multi Pad data can also be
saved to and loaded from disk.
Basic Procedure
1
Press the [DIGITAL
RECORDING] button.
DIGITAL STUDIO
SOUND CREATOR
SAMPLING
CUSTOM VOICE
DIGITAL RECORDING
SONG
STYLE
MULTI PAD
MIXING CONSOLE
EFFECTS
FILTER/EQ
TUNING
PART
Use the [NEXT] or
[BACK] button.
3
Select a menu.
Select this to call up the
Step Recording display.
The operations for each function corresponding to step #4 are covered in the following explanations.
Since newly created Multi Pad data is stored to Flash ROM, any pre-programmed data in the selected Multi Pad loca-
tion will be erased and replaced by your new settings. This includes all of the factory programmed Multi Pad banks.
If you've deleted the factory-set data, you can use the Restore function (page 130) to load a copy of it from the
included disks (page 6).
BANK 01
1
3
For details about Flash ROM, refer to "Memory Structure" on page 50.
2
Select "MULTI PAD CREATOR."
Select a Multi Pad
Bank.
4
Record/Edit Multi Pad data.
5
Store the created pad to Flash ROM. (See "NOTE" below)
6
Exit from the Digital Recording mode.
Multi Pad banks
60 banks in Flash ROM
58 banks can be replaced by the
new created pad data.
2
4
Select this to name the Multi Pad Bank.
Select this to store the recorded pad
data to Flash ROM. See the "CAU-
TION" notes below.
Select this to engage the Record
standby mode (synchronized standby).
Select a Multi Pad
number.
CAUTION
• The recorded data of the
Multi Pads is stored together
in a group of 58 banks in the
Flash ROM. For this reason,
you should be careful when
making edits and storing
your edits, since all 58 banks
will be overwritten with the
new data.
• Multi Pad banks #59 and #60
contain specially programmed
presets for sending MIDI con-
trol messages (page 65) and
changing the Scale Tuning set-
tings (page 134), respectively.
You cannot store your custom
Multi Pad data to these banks.
119
Reference