Root Settings; Chord Detect Settings; Storing The Midi Settings - Yamaha PSR-9000 Owner's Manual

Root Settings

The note on/off messages received at the channel(s) set to "ON" are recognized as the
root notes in the accompaniment section. The root notes will be detected regardless of
the accompaniment on/off and split point settings on the PSR-9000 panel.
The explanations here apply to step #5 of the Basic Procedure on page 150.
Select channel groups
1 through 8, 9 through
16, 17 through 24, and
25 through 32, respec-
tively.

Chord Detect Settings

The note on/off messages received at the channel(s) set to "ON" are recognized as the
fingerings in the accompaniment section. The chords to be detected depend on the fin-
gering mode on the PSR-9000. The chords will be detected regardless of the accompa-
niment on/off and split point settings on the PSR-9000 panel.
The explanations here apply to step #5 of the Basic Procedure on page 150.
Select channel groups
1 through 8, 9 through
16, 17 through 24, and
25 through 32, respec-
tively.

Storing the MIDI Settings

This allows you to store your custom MIDI settings to Flash ROM.
The explanations here apply to step #6 of the Basic Procedure on page 150.
Press this to set all
channels to OFF.
Set the desired track
to ON or OFF.
Press this to set all
channels to OFF.
Set the desired
track to ON or OFF.
This allows you to assign a
name to your group of
MIDI settings. (For details
on entering a name, refer
to "Basic Operation" on
page 44.)
Press this to execute the
Store operation.
Select the destination.
MIDI Functions
• Channels 1 - 16 are handled
with the MIDI A terminals or
the TO HOST terminal; chan-
nels 1 - 16 of a second MIDI
port or device are handled as
channels 17 - 32 with the MIDI
B terminals.
• When several channels are
simultaneously set to "ON," the
root note is detected from
merged MIDI data received
over the channels.
• Channels 1 - 16 are handled
with the MIDI A terminals or
the TO HOST terminal; chan-
nels 1 - 16 of a second MIDI
port or device are handled as
channels 17 - 32 with the MIDI
B terminals.
• When several channels are
simultaneously set to "ON," the
chord is detected from merged
MIDI data received over the
channels.
• Since all MIDI settings data is
stored to Flash ROM, any data
in the MIDI settings location will
be erased and replaced by
your new settings. This
includes the factory pro-
grammed preset MIDI settings.
If you've deleted the factory-set
data, you can use the Restore
function (page 130) to load a
copy of it from the included
disks (page 6).
153
Reference