KYMCO AK 550 Service Manual page 382

11.Steering
AK 550
Steering Stem Removal
SAFETY FIRST: Protective gloves and eyewear are recommended at this
point.
Support the vehicle with a suitable stand or jack so that the front wheel is off the
ground. Grip the bottom of the fork legs and turn the front end side-to-side. If the
movement is rough the bearings should be greased or replaced. If the movement
is to tight or loose the steering stem adjusting nut may need to be adjusted.
The KYMCO AK 550 uses ball bearings in the steering. Always replace the races
at the same time as the bearings.
11-10