① RF Status LED
◦
ON = Linked transmitter is on.
◦
Flashing = Searching for transmitter.
◦
OFF = Linked transmitter off or transmitter unlinked.
② Group Button
Press and hold for two seconds to enable manual group edit.
③ Data Sync LED
◦
ON = Data sync is on (receiver connected to GLX-D Frequency Manager).
◦
Flashing = Searching for frequencies.
◦
OFF = Data sync is off (receiver not connected to GLX-D Frequency Manager).
④ Link Button
Press to manually link receiver to a transmitter or to activate the remote ID function.
⑤ Channel
◦
Press to start a channel scan.
Shure Incorporated
10/37