Wsc Leg Assembly - IAC INDUSTRIES Workmaster Storage Cabinet Series Assembly Instructions Manual

WSC Leg Assembly:

1055101
Item Description
1 Adj. Pedestal Weldment
2 Leg Extender
HARDWARE KIT #HWR145
A 1/4-20x.75 Hex Head Bolt
B 5/16-18x.75 Hex Head Bolt
C Screw, #14 X 1.00 PPH SMS Black
D 1/4 Flat Washer
E Beam Connector Plate
F Floor Glide 5/16-18
G Adj. Pedestal Gusset Rt
H Adj. Pedestal Gusset Lt
Step 1:
Install the 5/16-18x.75 hex head bolt item B, 1/4 flat washers item D, and beam connector plate
item E to the left adj. pedestal gusset item H as shown below. Do not tighten hardware yet.
Step 2:
Repeat step 1 for the right
Step 3:
Slide the left and right adj. pedestal gussets with hardware onto the adj. pedestal item 1 as shown
below. Make sure gussets are flush with the top side of the pedestal before tighten hardware.
Qty
1
2
4
4
4
12
2
2
1
1
a
dj. pedestal gusset item G. Do not tighten hardware yet.
7