Connections; Connectors - Yamaha PF-500 Owner's Manual

Connections

Connectors

CAUTION
Before connecting the PF-500 to other electronic components, turn off the power to all the components. Before
turning the power on or off to all components, set all volume levels to minimum (0). Otherwise, electrical shock or
damage to the components may occur.
1
AUX IN [R], [L/L+R] jacks
The stereo outputs from another instrument can be connected to these jacks,
allowing the sound of an external instrument to be reproduced via the PF-
500's speakers. Refer to the diagram below and use audio cables for connec-
tion.
CAUTION
When the PF-500's AUX IN jacks are connected to an external device, first turn
on the power to the external divice, then to the PF-500. Reverse this order when
you turn the power off.
PF-500
AUX IN
L/L+R
phone plug
(standard)
2
1
AUX IN
AUX OUT
L/L+R R L/L+R R
AC INLET PEDAL AUX PEDAL
4 5
R
AUX IN
Tone Generator
audio cable
3
PHONES POWER
L LEVEL FIXED R
MIDI HOST SELECT TO HOST
MIDI PC-2 Mac USB
IN OUT THRU
7 8
6
Plug shape depends
on the divece.
AUX OUT
ON OFF
USB
9
TIP
The PF-500's [MASTER
VOLUME] dial setting affects
the input signal from the AUX
IN jacks, but the [REVERB],
[CHORUS], and BRIL-
LIANCE [MELLOW]
[BRIGHT] (page 28) settings
do not.
TIP
If you connect the PF-500 to
a monaural device, use only
the AUX IN [L/L+R] jack or
AUX OUT [L/L+R] jack.
51
PF-500