Message List - Yamaha PF-500 Owner's Manual

Yamaha electronic piano owner's manual
Hide thumbs Also See for PF-500:
Table of Contents

Advertisement

Message List

The messages are listed in alphabetical order.
Message
Meaning
This will be displayed following the "BulkDataReceiving Voice" mes-
sage. This indicates that the PF-500 finished receiving the bulk data.
Once you have verified this message, you may proceed to the next step.
Receiving bulk data has failed. Check the parameter settings and try
again.
The PF-500 is receiving the voice setting bulk data while this mes-
sage is displayed. Wait until the message disappears, then proceed to
the next step.
This message confirms that in the "VoiceBulkDump" operation
(page 80), you pressed B [–(NO)] to cancel while data was being
transmitted.
This message is displayed following the message "Executing." The
PF-500's internal processing is complete. You may proceed to the
next step.
When you attempted to rename a song and save it in "RenameSong"
(page 47), this message will appear if an identically-named song
already exists in the strage memory. Three seconds after this message
is displayed, you will return to the previous screen. Please specify a
different name.
This message prompts you to execute a file-related operation. Press
the B [+ (YES)] button to proceed, or press the [EXIT] button to
cancel.
The PF-500 is processing the data internally. Wait until the message
disappears, then proceed to the next step.
The normal (factory default) settings (except for the memory song
setting) ("FactorySet" on page 85) have been restored. This message
also appears if you press and hold down the C7 key and turn on the
power to the PF-500 (page 85).
The normal (factory default) settings (including the memory song
setting) ("FactorySet" on page 85) have been restored. This message
also appears if you press and hold down the C7 and B 6 keys and
turn on the power to the PF-500 (page 85).
The PF-500's flash memory (storage memory) has expired. Consult
your Yamaha dealer. If this message appears, the PF-500 will not
back up the songs and settings in memory. Press the [EXIT] button
to return to the previous screen.
86
PF-500

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents