Yamaha PF-500 Owner's Manual page 21

2.
Select a tune and start playback.
Press the voice group button for the demo song that you
want to hear.
The indicator of the voice group button you pressed will light, and the
demo song will begin playing. Subsequently, the demo songs will play
back consecutively from the upper left voice group button until you
stop the playback.
3.
Stop the playback.
Press the button of the voice group being played or the
SONG [START/STOP] button.
4.
Exit from demo mode.
Press the [DEMO] or [EXIT] button to exit from demo
mode.
By holding down [DEMO] and pressing A[–][+] to get the [Piano-
Demo] display, you can hear the piano demo. The piano demo lets
you compare the result of enabling/disabling each sampling tech-
nology.
GRAND PIANO1 ................. Stereo Piano (stereo sampling)
GRAND PIANO2 ................. Mono Piano (mono sampling)
E.PIANO1 ............................ mezzo piano (dynamic sampling,
E.PIANO2 ............................ mezzo forte (dynamic sampling, mez-
HARPSICHORD .................. forte (dynamic sampling, forte)
E.CLAVICHORD.................. with Sustain (with sustain sampling)
VIBRAPHONE ..................... no Sustain (without sustain sampling)
GUITAR ............................... with KeyOff (with key-off sampling)
CHURCH ORGAN............... no KeyOff (without key-off sampling)
JAZZ ORGAN...................... with StringRes (with string reso-
STRINGS............................. no StringRes (without string reso-
mezzopiano)
zoforte)
nance)
nance)
Listening to the Demonstration Tunes
To adjust the volume level of
the demo songs, use the
[MASTER VOLUME] dial.
To adjust the volume bal-
ance between the song
playback and the sound you
are playing on the keyboard,
use the [SONG BALANCE]
slider (page 42) .
NOTE
TIP
21
PF-500