Performance Route Processor Front Panel; Performance Route Processor Overview - Cisco CRS-1 System Description

Performance Route Processor Front Panel

Performance Route Processor Front Panel
The PRP front panel includes:
• Two 1GE (SFP) or 10G (SFP+) ports for 1-GE or 10-GE uplinks
• Service Ethernet RJ45 port
• Console port
• Auxiliary port
• Push button switch to Initiate OIR process
• LED to indicate OIR status and readiness for extraction
• Alphanumeric Display
• LEDs for card status and RP Active or Standby status
• USB socket
The following figure shows the front panel of the PRP card.
Figure 53: Performance Route Processor Front Panel
1 BITS 0
2 BITS 1
3 DTI 0
4 DTI 1
5 Management Ethernet RJ45 port
6 Alarm connector
7 Critical Alarm LED
8 Major Alarm LED
9 Minor Alarm LED
10 Control Ethernet 0 port (SFP or SFP+)
11 Link/Active 0 LED

Performance Route Processor Overview

The CRS PRP for the Cisco CRS 8-slot Line Card Chassis Enhanced router is a next generation Intel-based
RP that increases the CPU compute power, memory and storage capacity. The PRP provides both route
processing and system controller functionality for enhanced performance.
Cisco CRS Carrier Routing System 8-Slot Line Card Chassis Enhanced Router System Description
78
12 Control Ethernet 1 port (SFP or SFP+)
13 Link/Active 1 LED
14 OIR push button—Press to initiate OIR process
15 OIR Ready LED
16 USB socket
17 Service Ethernet RJ45 port
18 Console port
19 Auxiliary port
20 Alphanumeric LED Display
21 PRIMARY LED—PRP active or standby indicator
22 STATUS LED—Card status indicator
Route Processor