Cisco CRS-1 System Description page 100

Product IDs
Table 23: MSC Component Product IDs
Component
6
MSC
FP card
LSP
MSC
impedance
carrier
6
Refer to the product data sheet for ordering details.
Table 24: PLIM Component Product IDs
Component
1xOC-768
PLIM
4xOC-192
PLIM
16xOC-48
PLIM
Cisco CRS Carrier Routing System 8-Slot Line Card Chassis Enhanced Router System Description
90
Product ID
CRS-MSC-B(=),CRS-MSC-140G(=)CRS-MSC-X
CRS-MSC-X-L
CRS-FP40CRS-FP140CRS-FP-X
(400G)CRS-FP-X-L (400G)
CRS-LSPCRS-LSP-X
CRS-MSC-IMPEDANCE(=)
Product ID
1OC768-POS-SR(=)
4OC192-POS/DPT-LR(=)
4OC192-POS/DPT-IR(=)
4OC192-POS/DPT-SR(=)
4OC192-POS/DPT-VS(=)
16OC48-POS/DPT(=)
POM-OC48-LR2-LC-C(=)POM-OC48-SR-LC-C(=)
Product IDs
Description
Cisco CRS Layer 3 modular service
card (every MSC must have an
associated PLIM)
Cisco CRS Layer 3 forwarding
processor(every FP must have an
associated PLIM)
Cisco CRS Series Label Switch
Processor 140Gbps (CRS-LSP) or
400Gbps (CRS-LSP-X)
Blank card carrier for each empty MSC
slot (required for EMI compliance and
cooling)
Description
1-port OC-768c/STM-256c PLIM,
with short-reach optics (POS)
4-port OC-192c/STM-64c PLIM, with
long-reach optics (POS or DPT)
4-port OC-192c/STM-64c PLIM, with
intermediate-reach optics (POS or
DPT)
4-port OC-192c/STM-64c PLIM,
withshort-reach optics (POS or DPT)
4-port OC-192c/STM-64c PLIM, with
very-short-reach optics (POS or DPT)
OC-48c/STM-16c PLIM, uses small
form-factor pluggable (SFP) modules
(POS or DPT)
The PLIM uses 1 to 16 single-mode,
long- and short-reach optic modules
(mixing allowed):
• Long-reach optics
(POM-OC48-LR2-LC-C=)
• Short-reach optics
(POM-OC48-SR-LC-C=)