Combining Songs - Yamaha MD4 Owner's Manual

46
Editing Songs & Tracks

Combining Songs

The Song Combine function allows you to combine adjacent songs that were divided using the
Song Divide function. Songs that were recorded separately cannot be combined.
1. Press the [UTILITY] button and use the [√] and [®] SELECT buttons to select
the Song Combine function.
2. Press the [ENTER] button.
The display shows
3. Use the [–] and [+] DATA buttons to select the Songs that you want to com-
bine.
For example:
4. Press the [ENTER] button.
The display shows
5. Press the [ENTER] button to proceed or the [CLEAR] button to cancel.
The songs are combined in to one.
updated.
A marker is added at the point where the songs are combined and existing markers from both
songs remain valid.
If the total number of markers including the new marker at the join point exceeds eight, you
will not be able to access markers above Marker number 8. These higher markers are still stored,
however. So if you delete one or more of the first eight markers, they will reappear successively.
Song 1
before combine
Song 2
before combine
Song 1
after combine
When songs are combined, subsequent songs are renumbered. For example, Song 1 and Song 2
are combined into Song 1. The previous Song 3 then becomes Song 2, and so on.
MD4—Owner's Manual
[S] [1] [E]
[S]
[S] [1] [2]
Combine Point
appears on the display as the TOC is
[1] [2] [3]
[3] [4] [5]
[E]
[E]