After selecting the destination to which the patch data will be stored, press and hold the
[STORE] button until "NOW STORING..." appears on the display.
Now the patch is stored to the selected patch number in the MAGICSTOMP.
If you want to store multiple library ﬁles or patches to the MAGICSTOMP, rather than storing
them directly to the MAGICSTOMP as done in the previously described steps 7 and 8, ﬁrst
store those patches you want to use to the library that is displayed on the computer. Then,
bulk dump the whole library into the MAGICSTOMP. In this case, proceed with the following
steps after completing step 6 described previously.
Drag the patch to the library window and drop it on the patch number to which you want to
store the data, and the patch data is copied to that patch number.
You can have more than one Import dialog box open simultaneously.
After copying the desired patches to the library window, click on the "Bulk Transmit"
button in the tool bar and then click on "Start" in the dialog box
The library's contents are written to User Patch memory in the MAGICSTOMP.