Copying Patches You Like From The Library File - Yamaha MagicStomp Owner's Manual

Copying Patches You Like From the Library File

Steps 1 to 3 are identical to those found in the
ROM" on page 4.
4
Click on the "Import" button in the toolbar to display the "Import" dialog box.
5
Click "OpenFile" and select and open the library file you want to work with. The contents of
the library file are displayed in the import dialog box
6
Check the "Monitor" box in the "Import" dialog box. If you check this box, data for the
patch you select (click on) is sent to the MAGICSTOMP for monitoring. Try out the patch
with your guitar connected to the MAGICSTOMP
7
Clicking on the patch you want to store sends its patch data to the MAGICSTOMP.
Press the [STORE] button on the MAGICSTOMP to enter the Store Standby mode, then
use the – and + switches on the MAGICSTOMP to select the destination to which the
patch will be stored.
Import Button
"Using the Library Files (Patches) found in the CD-
(page 19).
(page 19).
U01¤SciFiFlange
PRESS[STORE]2sec
Destination patch number for storing
U11¤SciFiFlange
PRESS[STORE]2sec
6
Store Standby