Adjusting The Tone; Balancing The Ensemble Volume (Tg Master Balance) - Yamaha Disklavier DGC1B Basic Operation Manual

Adjusting the Tone

You can also adjust the tone using the BASS and
TREBLE knobs on the Amplifier, if necessary.
BASS knob: Turning it clockwise increases
and counterclockwise decreases
the bass sound.
TREBLE knob: Turning it clockwise increases
and counterclockwise decreases
the treble sound.
Turn the knobs until the desired tone is attained.
X OUT AUX IN VOLUME BASS
R L/L+R R
MAINS
TREBLE
Balancing the
Ensemble Volume
(TG Master Balance)
When playing back Ensemble songs, it is useful to
be able to balance the volume levels of the piano
and Ensemble voices. In other words, the volume
of the XG tone generator should not be too loud
or too quiet compared to the piano played by the
Disklavier.
Once you adjust the volume using the Tone
Generator Master Balance function, you can use
the [VOLUME] buttons on the remote control to
conveniently increase or decrease the overall
volume in a normal fashion.
These balance settings are stored in the Control
Unit, and are saved even when the Disklavier is
turned off.
1
Play back an Ensemble song.
2
Press the Selector until the
BALANCE indicator lights.
VOLUME
TEMPO
TRANSPOSE
BALANCE
The following display appears.
3
Use the [–/NO] and [+/YES]
buttons to adjust the volume of
the internal XG tone generator.
–/NO +/YES
25