Yamaha DD-65 Owner's Manual page 20

Play the Pads/Pedals
■ Setting the denominator of the time signature ...............................
Set the basic note value for each measure.
CL2
2 4 8
■ Setting the click volume ....................................................................
Sets the click volume (range: 1–127).
CL3
1 2 126
20
DD-65/YDD-60 Owner's Manual
1
Enter the denominator value setting function.
Press the [FUNCTION] button once, then press the [DRUM 1] or
[DRUM 2] button a number of times until the "CL2" item appears.
After a while, the current denominator value appears next to the
"CL2" indication.
2
Set the denominator value of the time signature.
Set the denominator value to one of the values 2 ( ), 4 ( ), 8 ( ), 16
( ) by using the DIAL.
NOTE
16
3
Press the [FUNCTION] button to exit from the
Function mode.
1
Enter the click volume setting function.
Press the [FUNCTION] button once, then press the [DRUM 1] or
[DRUM 2] button a number of times until the "CL3" item appears.
After a while current click volume will appear next to the "CL3" indi-
cation.
2
Set the click volume by using the dial.
127
3
Press the [FUNCTION] button to exit from the
Function mode.
• Default value is 4.