Assigning Voices To Individual Pads And Pedals And Saving To A Custom Kit ("Co1- Co3") - Yamaha DD-65 Owner's Manual

Play the Pads/Pedals
Assigning Voices to Individual Pads and Pedals and saving to a Custom Kit ("
The instrument contains a total of 254 high quality drum sounds plus 25 drum phrases (see the
"Drum Voice List" page 38)—and you can assign these freely to each of the 8 drum pads and 2 ped-
als. Try assigning some different voices and save your own "CO1– CO3" Custom Drum Kits.
NOTE
CO1
CO1 CO2
1 20 21
1 19 20
16
DD-65/YDD-60 Owner's Manual
• Custom Kit " CO1– CO3" and " 01" drum kit contents are the same until modified (see the
"Drum Kit List" page 41).
1
Press the [ASSIGN] button.
When you press the [ASSIGN] button, the button's lamp lights, and
"C01" appears on the display.
2
Turn the dial and select a Custom Kit "CO1–CO3"
for saving.
CO3
3
Select a pad or pedal to be assigned.
Strike any pad one time (or press a pedal), and the currently assigned
voice number for that pad/pedal is shown in the display.
20
4
Select a Voice Number.
You can select the voice by repeatedly striking the pad or repeatedly
pressing the pedal (while listening to the voice), or by turning the
DIAL.
● Striking the pad or pressing the pedal to select a voice.
Every time the pad is struck or a pedal is pressed, voice numbers will
increase by a value of one (1). In this method, you can hear and select
279
an assigned voice.
● Using the DIAL to select a voice.
Turn the DIAL to the right (clockwise), and voice numbers will
increase. Turn the DIAL to the left (counter-clockwise), and voice
numbers will decrease.
See the "Drum Voice List" on page 38.
Repeat the previous steps
als.
21 279
3 4
and for any or all of the pads and ped-
– ")
CO1 CO3