Midi Note Number Auto Selection On/Off - Yamaha DD-65 Owner's Manual

MIDI Note Number Auto Selection ON/OFF

Ordinarily, you should keep this function set to on for the instrument (default setting is on).
When MIDI Number Auto Selection is on and you strike the pad, the MIDI note number correspond-
ing to the pad (voice) you strike is sent via the MIDI OUT terminal.
On the other hand, when MIDI Number Auto Selection is off and you strike the pad, the MIDI note
number that you've specifically assigned to the pad is sent via the MIDI OUT terminal.
Ant
OFF On
1
Enter the MIDI Number Auto Selection setting
function.
After pressing the [FUNCTION] button, press the [DRUM 1] or
[DRUM 2] button a number of times until the "Ant" item appears.
After a while, the current setting (on/off) appears next to "Ant".
2
Set MIDI Number Auto Select on/off as desired.
Turn the DIAL clockwise to set to ON, and turn it counter-clockwise
to set it to OFF.
3
Press the [FUNCTION] button to exit from the
Function mode.
• MIDI Note Number Auto Selection ON/OFF is automatically turned off
NOTE
when a MIDI Note Number is changed.
About MIDI
DD-65/YDD-60 Owner's Manual
33