Skil TS6307-00 Owner's Manual page 26

Fig. 22
How To Reach 47° Left Stop
1. Loosen the blade-bevel-lock lever and push the elevation wheel to the right 45° when the
releasing pin touches the
2. Press the releasing pin and push the elevation wheel to the end right until the shaft of the
releasing pin touches the 45° bevel-stop plate (Fig.24).
3. Tighten the blade-bevel-lock lever and loosen
Fig. 24
How To Reach -2° Right Stop
1. Loosen the blade-bevel-lock lever and push the elevation wheel to the left 0 degrees when
the releasing pin touches the
2. Press down the releasing pin and push the elevation wheel to the end left until the shaft of
the releasing pin touches the
3. Tighten the blade bevel lock lever and loosen the releasing pin.
26
45° bevel-stop plate (Fig.24).
1
3
2
Releasing Pin
0° bevel-stop plate.
0° bevel-stop plate.
Fig. 23
the releasing pin (Fig.25).
Fig. 25