Yamaha Clavinova CVP-59S Owner's Manual page 50

Use the MEAS. LCD button to select a different number of measures
for the selected section, or the data dial or [+]/[–] buttons once the
MEAS. parameter has been selected. As soon as you choose to change
the number of measures in the section, the "Clear SECTION ?"
prompt will appear, since you will have to clear all parts of the currently
selected section and start recording from scratch if you change the
number of measures. Press OK to clear the section, or CANCEL to abort.
Once the section has been cleared you can select a new number of meas-
ures as required: 1 through 8. The FILL IN section has only 1 measure
and the number of measures cannot be changed although the FILL IN
section can be cleared using this operation.
Once the BEAT and/or MEAS. parameters have been set as required,
press the PAGE [<] button to go back to the first custom style page.
B
Select the Part & Voice You Want to Record
Use the PART LCD button, the data dial, or [+]/[–] buttons to select
the part you want to record:
R1 Rhythm 1
R2 Rhythm 2
Bs Bass
C1 Chord 1
C2 Chord 2
Pd Pad
P1 Phrase 1
P2 Phrase 2
The R1 part is initially selected and set to the record mode.
Any part you select can be set to the record mode by using the rightmost
LCD button to select "REC" after selecting the part ( the part number
will appear white in a black box). Since parts other than R1 and R2 must
be cleared before they can be recorded (if the source style is a preset
style or a style loaded from the optional Style File disk) the "Clear
Part ?" confirmation will appear if you select a part that contains data:
press OK to clear the part and continue, or CANCEL to abort. Only one
part can be set to the record mode. All other parts will be set to "PLAY"
(part number surrounded by box) or turned "OFF" (part number only —
no box). Parts that contain no data are indicated by a dot in place of the
part number.
......................
Custom Style
47