System Exclusive Messages - Yamaha Clavinova CVP-59S Owner's Manual

MIDI Data Format / MIDI-Datenformat / Format des donées MIDI / Formato de datos MIDI
1.2.21.3 All Notes Off
Switches off all of the channel's "on" notes. Any notes being held by HOLD1 or
SOSTENUTO continue to sound until HOLD1/SOSTENUTO goes off.
1.2.21.4 Omni Off
Same processing as for All Notes Off.
1.2.21.5 Omni On
Same processing as for All Notes Off.
1.2.21.6 Mono
Same processing as for All Sound Off.
1.2.21.7 Poly
Same processing as for All Sound Off.
1.3 Program Change
If the Program Change Filter in Function [MIDI 2] is set to "ON" transmission and
reception are disabled.
1.4 Pitchbend

2. System Exclusive Messages

2.1 Parameter Change
The CVP 79A/69/69A/59S models support the following Parameter Change messages.
[UNIVERSAL REALTIME MESSAGE ]
1) Master Volume
[UNIVERSAL NON-REALTIME MESSAGE ]
3) General MIDI Mode On
[XG NATIVE ]
1) XG System on
2) XG System Data parameter change
3) Multi Effect1 Data parameter change
4) Drum Setup Data parameter change
[Others]
1) Master tuning
2) Channel Detune
3) Volume & Expression Realtime Control off
2.1.2 Universal Realtime Message
2.1.2.1 Master Volume
11110000 F0
01111111 7F
01111111 7F
00000100 04
00000001 01
0sssssss *SS
0ttttttt TT
11110111 F7
or
11110000 F0
01111111 7F
0xxxnnnn XN
00000100 04
00000001 01
0sssssss SS
0ttttttt TT
11110111 F7
The volume for all channels will be changed.
*Hexadecimal representation of 0sssss ss. (Same below)
126
= Exclusive status
= Universal Realtime
= ID of target device
= Sub-ID #1=Device Control Message
= Sub-ID #2=Master Volume
= Volume LSB
= Volume MSB
= End of Exclusive
= Exclusive status
= Universal Realtime
= When N is received N=0~F, whichever is received.
x = don't care
= Sub-ID #1=Device Control Message
= Sub-ID #2=Master Volume
= Volume LSB
= Volume MSB
= End of Exclusive
2.1.3 Universal Non-Realtime Message
2.1.3.1 General MIDI Mode On
11110000 F0 = Exclusive status
01111110 7E = Universal Non-Realtime
01111111 7F = ID of target device
00001001 09 = Sub-ID #1=General MIDI Message
00000001 01 = Sub-ID #2=General MIDI On
11110111 F7 = End of Exclusive
or
11110000 F0 = Exclusive status
01111110 7E = Universal Non-Realtime
0xxxnnnn XN = When N is received N=0~F, whichever is received.
00001001 09 = Sub-ID #1=General MIDI Message
00000001 01 = Sub-ID #2=General MIDI On
11110111 F7 = End of Exclusive
When the General MIDI mode ON message is received, the MIDI system will
be reset to its default settings.
This message requires approximately 50ms to execute, so sufficient time
should be allowed before the next message is sent.
2.1.4 XG Native Parameter Change
11110000 F0 Exclusive status
01000011 43 YAMAHA ID
0001nnnn 1n When n is received n=0~F, whichever is received.
When n is transmitted n always=0.
01001100 4C Model ID of XG
0aaaaaaa aaaaaaa Address High
0aaaaaaa aaaaaaa Address Mid
0aaaaaaa aaaaaaa Address Low
0ddddddd ddddddd Data
| |
11110111 F7 End of Exclusive
Data size must match parameter size (2 or 4 bytes).
2.1.4.1 XG System On
11110000 F0 Exclusive status
01000011 43 YAMAHA ID
0001nnnn 1N When N is received N=0~F, whichever is received.
When N is transmitted N always=0.
01001100 4C Model ID of XG
0aaaaaaa 00 Address High
0aaaaaaa 00 Address Mid
0aaaaaaa 7E Address Low
00000000 00 Data
11110111 F7 End of Exclusive
When the XG System On message is received, the MIDI system will be reset
to its default settings.
The message requires approximately 50ms to execute, so sufficient time should
be allowed before the next message is sent.
2.1.4.2 XG System Data parameter change
See Tables 1-1, 1-2.
2.1.4.3 Multi Effect1 Data parameter change
See Tables 1-1, 1-3.
2.1.4.4 Multi Part Data parameter change
See Tables 1-1, 1-4.
2.1.4.5 Drum Setup Data parameter change
See Tables 1-1, 1-5.
If operation is in XG mode, this message reinitializes all drum setup parameters.
The drum setup will not be reset if any changes are made from the CVP 79A/69/69A/
59S front panel.
X = don't care