Yamaha Clavinova CVP-59S Owner's Manual page 108

Z
Select the Micro Tuning Function
X
Select a Key
............................................................................................................
Select the key you want to tune by pressing the key on the keyboard.
The selected key will appear on the display.
C
Tune
.................................................................................................................................
Use the TUNE s and t buttons to tune the selected key as required.
The data dial and [+]/[–] buttons can also be used. You can play the key
being tuned to check the sound during this operation. The maximum
tuning range is 100 cents (100 cents = one semitone). The normal tun-
ing ( 0cent) for the selected key can be instantly recalled by simultane-
ously pressing the TUNE s and t buttons.
V
Repeat as Necessary
Repeat steps 2 and 3 until all the required keys have been tuned.
Disk Operations:
Saving, Loading, Renaming, and Deleting Micro-tuning Files
Make sure that the disk you want to use for this operation is inserted
in the disk drive, and both the song record or playback modes are not
engaged before proceeding.
Z
Select a File Operation
Use the fourth LCD button to select the LOAD, SAVE, DELETE, or
RENAME operation.
X
Press START
............................................................................................................
Press the START LCD button to begin the selected operation, then
proceed according to the selected operation as described below:
...................................................
....................................................................................
...............................................................................
The Utility Functions
• The Micro-Tuning settings are retained
in memory even when the power is
turned off if the BACKUP page TUNE/
MICRO TUNING parameter is turned
ON (page 107), otherwise all keys are
set to "0".
..................................................
• The Micro Tuning Disk Operations
cannot be used when the song record
or playback mode is engaged — the
"Button not valid!" alert will be dis-
played.
105