Manual: Ecoline Series EL-250RGB Micro
8. Operation
1.
Connect the power cable to the device and than to the mains
2.
Turn on the power switch
3.
Your device runs in the auto mode now
4.
By pressing the switch „Auto/Music", the modes switch between the auto and music
mode
5.
Control the music-sensitivity with the trim pot at the front panel. The LED is flashing
when the device is triggered.
6.
Change the colors of the laser device, by pressing the „Red", „Green" or „Blue" switches.
The colors can be combined or switch on/off in any way.
7.
Turn off the power switch to switch off the device and disconnect the power cable from
the mains.
page 7 / 15