Recording Your Performance - Yamaha CP300 Owner's Manual

Recording Your Performance

Recording Your Performance
MASTER PERFORMANCE TRANSPOSE 1
SONG SELECT REC
MASTER EDIT PERFORM.FILE
NEW SONG
1 3 4,6
n The Performance mode is automatically turned off if the CP300 is set to recording or recording standby while
Performance mode is on.
1
Press the SONG SELECT [N] button and [O] button at the same time.
n "P-000: New Song" is a blank Song provided for you to record your performance.
2
Select a Voice (page 25).
In addition to selecting the desired Voice, make sure to set other sound-related parameters, such as reverb
and chorus. When you've finished making the settings, press the SONG SELECT [N] or [O] button
to return to the "New Song" display.
3
Select a recording track.
Recording to Track 1:
Press the TRACK [1] button while holding down the [REC] button.
Recording to Track 2:
Press the TRACK [2] button while holding down the [REC] button.
Recording to Tracks 3 – 16:
Press the B [– (NO)][+ (YES)] button while holding down the [REC] button, then select the desired
recording track, 3 – 16. Keep holding down the [REC] button and press the TRACK [3-16] button.
42
CP300 Owner's Manual
3
TRACK
SONG FILE MIDI OUT PANEL LOCK A
2 3-16
STOP PLAY/PAUSE
SONG SETTING
DOWN UP
SYNCHRO START
TEMPO C
SONG
5
A
PresetSong
P-000:NewSong
C
Using the Click Sound
You can record data while using the Click sound. Press the [CLICK] button in Step 2.
The Click sound is not recorded.
n Refer to page 48 for more information on recording in Dual/Split mode.
2
GRAND GRAND MONO
B CONTRAST
PIANO 1 PIANO 2 PIANO E. PIANO 1 E. PIANO 2 E. PIANO 3
NO YES 1 2 3 4 5 6
ORGAN 1 ORGAN 2 HARPSI. STRINGS CHOIR/PAD GUITAR
EXIT
9 10 11 12 13 14
D
VOICE/PERFORMANCE
Indicates the current measure.
(The words "bar" and "measure" are used interchangeably.)
Bar 001
VOICE EDIT SPLIT REVERB CHORUS SPEAKER MIDI SETTING
CLAVI. VIBES
7 8
DEMO
VARIATION MASTER EQ EDIT CLICK OTHER SETTING
BASS XG
15 16
B
NO YES
D